Congratulations on your purchase of a high-quality
Insignia product. Your 2.1 Bluetooth Desktop
Speaker System is designed for reliable and
• Subwoofer with an attached 5-foot
(1.5-meter) power cord
• Right satellite speaker with an attached 5-foot
• Left satellite speaker with an attached 5-foot
• 3.5mm 5-foot (1.5-meter) stereo audio cable
• Quick Setup Guide
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User Guide
is not provided in the box but is available online.
Go to www.insigniaproducts.com, then click
Support & Service. Enter your model number in
the box under Manual, Firmware, Drivers &
Product Information, then click .
Before using your new product, please read these instructions
to prevent any damage.
2.1 Bluetooth Desktop Speaker System
Setting up and turning on
1 Plug the cable attached to the right speaker into
the R jack on the subwoofer.
2 Plug the cable attached to the left speaker into
the L jack on the subwoofer.
3 Plug the power cord attached to the subwoofer
into a power outlet.
4 Press the Power/pairing button for about
half a second. Your speaker system turns on.
5 Follow one of the connection methods (Bluetooth or wired)
to connect the speaker system to a source.
When the LED is...
Your speaker set is...
Blue and blinks rapidly
In pairing mode
Blue and lights continuously
Paired to a Bluetooth device
Blue and blinks slowly
Not paired to a Bluetooth device
In AUX IN mode
In sleep mode
Quick Setup Guide
Connecting with a Bluetooth device
Pairing with a Bluetooth device
1 Make sure that your speaker system is turned on.
2 If the blue LED is not blinking rapidly, press and
hold the Power/pairing button for three
3 Make sure that your Bluetooth device is within
33 feet. (10 meters) of your speaker system.
4 On your source device, turn on the Bluetooth feature,
then set your device to pairing mode. (For instructions,
see the documentation that came with your Bluetooth
device.) On your Bluetooth device, select
Your speaker system pairs with the Bluetooth device and
the blue LED lights continuously.
Note: If you are pairing with a computer, make sure
that your Bluetooth speaker is selected as the
computer's default playback device. See the
computer's documentation for instructions.
Make sure that your Bluetooth device supports
the Bluetooth 3.0 + EDR A2DP protocol and that
your device is not paired with another device.
To determine what Bluetooth protocol your device
supports, see the documentation that came
with your device.
Reconnecting to a paired device
1 If your speaker system is turned oﬀ, turn it on.
2 Make sure that your Bluetooth device is turned on,
the Bluetooth feature on the device is turned on,
and the device is within range of your speaker
system with no obstructions between your speaker
system and the device.
Note: If your speaker system and your Bluetooth device
do not automatically re-pair, select Insignia
NS-PSB4521 on your Bluetooth device.