Asus P2L97-DS User Manual page 13

III. INSTALLATION
Jumpers
1) FS0, FS1, FS2
2) CF1, CF2, CF3, CF4
3) CLRTC
Expansion Slots/Sockets
1) System Memory
2) DIMM Sockets
3) SEC CPU Slot
4) SLOT1, SLOT2
5) PCI1, PCI2, PCI3, PCI4
6) AGP
Connectors
1) PS2KBMS
2) PS2KBMS
3) PRINTER
4) COM1, COM2
5) FLOPPY
6) USB
7) PRIMARY/SECOND. IDE p. 30 Primary / Secondary IDE Connector (40-pin blocks)
8) IDELED
9) CHA_, CPU_, PWR_FAN p. 31 Chassis, CPU, Power Supply Fan Connectors (3-pin block)
10) IR
11) ATXPWR
12) WOL_CON
13) NARROW/WIDE SCSI
14) TB LED (PANEL)
15) SMI (PANEL)
16) PWR (PANEL)
17) RESET (PANEL)
18) KEYLOCK (PANEL)
19) KEYLOCK (PANEL)
20) SPEAKER (PANEL)
21) CHASSIS
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not
use this address otherwise conflicts will occur.
† PCI slot 4 share the same interrupt number (INT#) as the optional onboard SCSI so PCI slot 4
card must be able to share an INT# or make sure that it does not use an INT# at all.
§ Optional
ASUS P2L97-DS User's Manual
p. 15 CPU Bus Frequency
p. 15 CPU Core:Bus Frequency Multiple
p. 16 Clear Real Time Clock (RTC) RAM
p. 19 System Memory Support
p. 20 DIMM Memory Module Support
p. 21 Single Edge Contact CPU Support
p. 26 16-bit ISA Bus Expansion Slots
p. 27 32-bit PCI Bus Expansion Slots
p. 27 Accelerated Graphics Port
p. 28 PS/2 Keyboard Connector (6-pin female)
p. 28 PS/2 Mouse Connector (6-pin female)
p. 29 Parallel (Printer) Port Connector (25-pin female)
p. 29 Serial Port COM1 & COM2 (two 9-pin male)
p. 29 Floppy Drive Connector (34-1 pin block)
p. 30 Universal Serial BUS Ports 1 & 2 (two 4-pin female)
p. 31 IDE LED Activity Light (2 pins)
p. 32 Infrared Port Module Connector (5 pins)
p. 32 ATX Motherboard Power Connector (20-pin block)
p. 33 Wake on LAN (3 pins)
§
p. 33 Fast/Narrow SCSI (50 pins) & Fast/Wide SCSI (68 pins)
p. 34 LED Lead (2 pins)
p. 34 SMI Switch Switch Lead (2 pins)
p. 34 ATX Power Switch / Soft Power Switch (2 pins)
p. 34 Reset Switch Lead (2 pins)
p. 34 System Power LED (3 pins)
p. 34 Keyboard Lock Switch Lead (2 pins)
p. 34 Speaker Connector (4 pins)
p. 35 Chassis Open Alarm Lead (3-pin block)
*
†
13