Advertisement
Basic Order Code RHM 04
Sensor Size
Temperature Range
T1
NT from -20°C to +120°C (standard)
TA
ET from -45°C to +120°C
T2
ET2 Extended Temperature Range from -45°C to +210°C
T3
ET1 Extended Temperature Range from -196°C to +50°C
T4
HT High Temperature Range from 0°C to +350°C
Pressure Range of Measuring Loops @ 120°C
P1
P2
PH
RHM 04
-
g
© 2013 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.
pmax = 150 bar, M0 Material (standard)
pmax = 250 bar, M0 Material
pmax = 870 bar, HP Material
Construction Type (pmax indications @ 120°C)
PM0
Parallel Measuring Loops with removable Manifold and PTFE Seals,
pmax = 400 bar with thread connection, 214 bar with flange connection
SM0
Serial Measuring Loops with removable Manifold and PTFE Seals
pmax = 400 bar with thread connection, 214 bar with flange connection
PF0
Parallel Measuring Loops Seal Less Version
SF0
Serial Measuring Loops Seal Less Version, pmax = 42.9 bar
PFT
Parallel Measuring Loops Seal Less Version for Thread Connection, pmax = 530 bar
PH0
Parallel Measuring Loops with High Pressure Manifold and PTFE Seals, pmax = 540 bar
PHH
Parallel Measuring Loops with Very High Pressure Manifold and PTFE Seals,
pmax = 870 bar
Material of Wetted Parts
M0
Measuring Loops 1.4539 (904L), Manifold/Connection 1.4571 (316Ti) (standard)
M1
Measuring Loops and Manifold/Connection 1.4571 (316Ti)
M3
Measuring Loops and Connection Part 2.4602 (Alloy C22), Seal Less Construction
Types only
HP
Measuring Loops HP 160; not with PF0, SF0, PFT Construction Type
Process Connection
D1
D2
A1
A2
A3
R1
A6
G1
N1
W1
S1
S2
P2
-
-
-
Flange DIN DN15/PN40 Form C
Flange DIN DN15/PN100 Form E
Flange ANSI ½" 150# RF/SF
Flange ANSI ½" 300# RF/SF
Flange ANSI ½'' 600# RF/SF
Flange ANSI ½'' 1500# RTJ
Flange ANSI ½" 1500# RF
Female Thread G ¼"
Female Thread ¼" NPT
Swagelok ¼" tube inlet (SS-400-1-4W) - valid for SS only
Sanitary ½" Triclamp, DIN 32676, pmax = 40 bar @ 120°C
Sanitary NW10, DIN 11851, pmax = 40 bar @ 120°C
Autoclave 3/8" MP (9/16-18 UNF female thread)
Others on request
www.ge-mcs.com
920-493A
Advertisement
