IC Realtime Mini 1U Series User Manual page 107

Parameter Function
Capture You need to input capture channel number so that system can backup
snapshot file when alarm occurs.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
7.3.2.7 Detect
Analysis the video, system enable motion detection alarm when it detects the motion signal
reached the specified sensitivity.
The detection interface is shown as in Figure 7-40 .
X468H468H468H X
Figure 7-40
Figure 7-41
107