Fujitsu 38B2-M Owner's Manual page 14

Colour monitor 38B2-M
Monitor settings using the OSD menu
You can use the buttons on the control panel to set the screen display via an integrated OSD menu
(On-Screen-display).
The OSD menu is available in five languages (default setting: English). With the OSD
i
function Language you can select another language.
AUTO
To set the OSD menu, perform the following steps:
Ê
Press the MENU button to activate the OSD menu.
The main menu appears on the screen with icons for the setting functions.
If you want to change another setting:
Ê
Use the 3 or 4 button to mark another icon in the main menu, e.g. H.Position.
Ê
Press the MENU button and make the desired setting with the 3 or 4 button.
Ê
To save and end the settings, mark the Exit icon in the main menu with the buttons 3 or 4
and then press the MENU button.
If you make no changes for 10 seconds, the settings will automatically be saved and the OSD
menu will be deactivated.
If you want to change other settings, select the corresponding function from the main menu.
All possible adjustments of the monitor are described in the following.
Setting the contrast of the display (Contrast)
If the contrast is set too high, bright surfaces can no longer be distinguished from
very bright surfaces. If the contrast is set too low, the maximum brightness will not
be achieved.
12 - English
MENU
The first symbol (Contrast) is highlighted. At the
same time, the corresponding setting window
appears.
If you want to change the contrast:
Ê
Press the MENU button and make the
desired setting with the 3 or 4 button.
Ê
Press the MENU button to return to the
main menu.
A26361-K853-Z200-1-5E19