Fujitsu 38B2-M Owner's Manual page 10

Colour monitor 38B2-M
4b
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled out!
The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the
computer.
Ê
Connect the connector of the data cable (1) to the active monitor port on the computer and
secure the plug-in connection by tightening the safety screws.
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Plug the power adapter cable (2) into the power connector of the monitor.
Ê
Firmly insert the socket with the power cable supplied into the power cable connection of the
power adapter (3) and check whether the socket is securely seated.
Ê
Depending on the version, plug the plug of the power cable into the monitor mains outlet of the
computer (4a) or into a properly grounded mains outlet (4b).
Ê Insert the audio cable plug in the AUDIO IN socket (5) of the monitor.
Ê
Insert the other audio cable plug in the corresponding port of your computer and make sure it
engages properly.
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
8 - English
1
4a
3
2
5
A26361-K853-Z200-1-5E19