Notes On Power Management; Changing The Monitor Settings - Fujitsu 3816 FA Owner's Manual

Notes on power management

If your computer is equipped with power management, the monitor can support this function fully.
Here the monitor does not distinguish between the individual energy-saving modes of the computer
(standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the
mode with the highest energy-saving effect.
Stage
Power indicator
Function
Power consumption
If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to
indicate the status change.
Once an input is made at the computer the screen contents are redrawn and full power is restored.
For detailed information on how energy-saving mode operates refer to the Operating Manual or
Technical Manual of the computer.
When the monitor is switched to the energy-saving mode by the power management
i
system a power consumption of up to 2 W is maintained to feed the circuit for redrawing
the screen contents.
To completely switch off the power consumption, switch off the computer or pull the plug
of the monitor power cable out of the monitor socket of the computer or of the mains
outlet.

Changing the monitor settings

When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Basic monitor adjustment with a test pattern
i
This function is only active for analogue operation.
If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT,
Windows Me, Windows 2000 or OS/2 (with Windows emulation installed) is used, the basic monitor
settings can be set with the floppy disk supplied.
Ê
Insert the supplied floppy disk into the floppy disk drive.
Ê
Run the file LCDADJ.EXE on the floppy disk.
A test pattern appears on the screen.
A26361-K882-Z100-5-5E19
ON
lights green
Monitor
operating
normally
normal
< 35 W
LCD monitor 3816 FA
Energy-saving mode
glows amber
Monitor
is dark
reduced to < 2 W
English - 11