Advertisement
SL STRIP 400 TW LED Luminaires
Installation & User's Manual
Connecting SL STRIP 400 TW LED Luminaires to AC Power
If the unit is supplied with an AC input cable without an input connector installed. The input connector is a user-
supplied accessory.
Table 2 describes how to connect power to your SL STRIP 400 TW LED Luminaire. Field wiring of the SL STRIP
400 TW LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit. The following
wiring scheme is used:
Table 2: SL STRIP 400 TW LED Luminaire (IP65 Rated Models) AC Input Connections
Wire Color
Purpose
Brown
Main / Line (100 to 240VAC)
Blue
Neutral
Green/Yellow
Ground (Earth)
Bottom of Unit
AC Output
AC Input
Figure 3: SL STRIP 400 TW LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Showline Dealer or Service Center.
Sh wline
7
Connecting Power
Advertisement
