Changing The Scale Of The Map; Moving The Map To The Location You Want To See - Pioneer AVIC-900DVD Operation Manual

CRB1881A_ENGLISH.book Page 21 Thursday, April 24, 2003 11:54 AM
(8) VOICE button
Touch to change to voice recognition mode.
➲
The voice operation of the navigation system
© Chapter 5
(9) NEW button
Displays the newness or oldness of the traffic
information by colour. Touch to display a traffic
information list.
➲
Using traffic information © Page 38
(10) TMC button
When there is a route, touch to check whether
there is any traffic information relating to your
route.
When there is no route, touch to display a traffic
information list.
(11) Current time
(12) Estimated time of arrival (or travel time
to your destination)*
The display changes with each touch.
(13) Tracking mark
The tracking mark shows the route your vehicle
has travelled.
➲
Select the tracking setting © Page 49
(14) Map of your surroundings (Side map)
Touching this takes you to the map scroll screen.
(15) Distance to an intersection*
Displayed on the enlarged intersection map. The
green bar gets shorter as your vehicle
approaches an intersection.
(16) Next direction of travel*
(17) Area to Avoid*
This is indicated only when "Areas to Avoid" is
set to "On".
➲
About detour area © Page 37
❒
Information with the mark (*) appears only
when the route is set.
❒
Depending on the conditions and settings,
some items may not be displayed.

Changing the scale of the map

Touching the "Map scale" key displayed on the
upper right of the screen displays the scale
gauge and "Map scale" key. Directly touching the
"Map scale" key changes the map to the selected
scale. Touching or on the scale gauge
allows you to specify the scale in greater detail
within a range of 25 meters - 2000 kilometres (25
yards - 1000 miles).
Moving the map to the location
you want to see
Touching anywhere on the map for at least 2 sec-
onds changes the map to Scroll mode and the
map begins scrolling in the direction you
touched. The scrolling stops when you remove
your finger from the screen. At this time, the
cross pointer appears at the centre of the screen.
Also a line connecting between the current loca-
tion and cross pointer appears.
Pressing the display's NAVI button returns you
to the map of your surroundings.
(2) (1)
(3)
(1) Scroll location
The position of cross pointer shows the location
selected on the current map.
(4)
21