Graphics & Gpgpu & Co-Processors - Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Manual

H
IV
Section Graphics & GPGPU & Co-Processors
Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller) with following resolutions:
1920x1200x16bpp, 1920x1080x16bpp, 1600x1200x16bpp, 1680x1050x16bpp, 1440x900x16bpp,
1280x1024x32bpp, 1152x864x16bpp, 1024x768x32bpp, 800x600x32bpp, 640x480x32bpp
S26361-F2571-E26
Optional Front-VGA
for Onboard Controller only
consists of internal cable and
front VGA connector
max. 1x per system
S26361-F3736-E1
PY GPGPU Cable Kit
consists of 2 power cables and
an universal PCI card holder
max. 1x per system
as long
S26361-F2856-E997
PY NVIDIA Tesla C2075 Computing-Processor
NVIDIA Tesla C2075
6 GB Memory
PCIe Gen2-x16
2x for GPGPU purpose only
800W PSU is recommended
occupied space for two PCI slots
full height bracket
max. 2x per system
S26361-F3736-E2
PY K20 / K20X Mounting Kit
consists of 2 power cables, an
1x PCI card holder + Airduct
max. 1x per system
S26361-F2222-E22
PY NVIDIA Tesla K20 Computing-Processor
NVIDIA Tesla K20
5 GB Memory
PCIe Gen2-x16
2x 2496 cores
for GPGPU purpose only
power cables from PSU needs to be ordered
800W PSU is recommended
occupied space for two PCI slots
full height bracket
max. 2x per system
I
S26361-F2748-E537
PY VGA card 512MB PCI-e x1
NVIDIA NVS300
512 MB PCIe-x1
Connectors: 1x LFH 59
cable kit for 2x DVI or 2x VGA
cable kits included
Dual head + professional 2-D + 3-D
supported for Windows OS
native driver support for Linux OS
full height bracket
max. 1x per system
The hight end optional NVIDIA NVS300 graphic card offers dual head operation
and fully 3D video support. The cables for either two times
DVI-I or VGA (cable kit) connections are part of the delievery.
Remote Video direction via iRMC must be disabled.
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Only one card per server is allowed.
NVIDIA Tesla GPGPU
One or two GPGPU (General Purpose Graphical Processor Unit) can be ordered as option.
The Power Cable kit has to be ordered seperatly and will be installed if ordered ex factory together
with the GPGPU card. New cards requires the suitable Air Duct and bracket kit!
No mix betwenn differnet types of GPGPU or Co-Processor cards allowed
as stock last
This mounting kits contain an airduct that uses 2 bays 1.6" x 5.25".
If these are ordered this 2 bays cannot contain ODD or backup devices.
Note the mountingkit is needed
only one timer per System
The GPGPU cards can be ordered twice
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
PY NVIDIA Tesla C2075 Computing-Processor
800W PSU is recommended
PY NVIDIA Tesla K20 / K20X
Computing-Processor
With 2x PY NVIDIA Tesla K20X
ambient temperature should not excced 30°C
S26361-F2222-E24
PY NVIDIA Tesla K20X Computing-Processor
NVIDIA Tesla K20X
6 GB Memory
PCIe Gen3-x16 technical via card BIOS GEN2
2688 cores
for GPGPU purpose only
power cables from PSU needs to be ordered
800W PSU is recommended
occupied space for two PCI slots
full height bracket
max. 2x per system
Status 2014-01-30
S26361-F2748-L537
PY VGA card 512MB PCI-e x1
for loose delivery
S26361-F3736-L1
PY GPGPU Cable Kit
consists of 2 power cables and
an universal PCI card holder
vor loose delivery
S26361-F2856-L997
PY GPU card 6GB PCIe2 x16
for loose delivery
S26361-F3736-L2
PY K20 / K20X Mounting Kit
consists of 2 power cables, an
PCI card holder + Airduct
for loose delivery
800W PSU is recommended
S26361-F2222-L22
S26361-F2222-L24
for loose delivery
18 of 36