Memory - Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Manual

Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/SystemArchitect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/SystemArchitect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section III
S26361-XXX-XXX
Memory XXX MB
X times
max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates.
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/index.html
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
Prices and availability see price list and PC-/SystemArchitect.
Subject to change and errors excepted.

Memory

There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX
Memory XXX MB
max. X times per system
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
(internet)
Status 2014-01-30
4x
(extranet)
2 of 36