Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Manual page 25

M1
S26361-F2826-E325
SFF (2.5") HDD-Box for additional
8x SFF (2.5") SAS hard disks
Occupies 2.5" HDD extension area
max. 1x per system
S26361-F3673-E1
Adapter Kit second RAID Controller
required if 2 RAID controllers
are necessary
max. 1x per system
S26361-F3554-E512
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2108
LSI MegaRAID
512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional BBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3257-E270
Cache Battery Backup Unit
with 70cm cable set
max. 1x per Controller
S26361-F3668-E1
24x SAS Expander
required for HDDs within
accessible drives area
max. 1x per system
S26361-F2826-E425
SFF (2.5") HDD-Box for additional
8x SFF (2.5") SAS hard disks
Occupies 2x 1.6" bays
in the accessible bay area
3.2 * 5.25", satin black bezel
max. 1x per system
O
2.5" HDD's
PRIMERGY TX300 S7 / RX350 S7
M2
see Conf. diagram Option E
Adapter Kit second RAID Controller
for loose delivery please order
S26361-F3673-L1
as soon as available
S26361-F3669-E1
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2208
LSI MegaRAID
1GB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional BBU or FBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3669-E100
TFM Module for FBU option
max. 1x per Controller
S26361-F3669-E170
Flash Backup Unit
with 70cm cable set
max. 1x per Controller
see Conf. diagram Option F
Fujitsu PRIMERGY Server
System configurator and order-information guide
24x SAS Expander
for loose delivery please order
S26361-F3668-L1
S26361-F3668-E1
24x SAS Expander
required for HDDs within
accessible drives area
Raid Controller required
max. 1x per system
Status 2014-01-30
25 of 36