Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Manual page 3

Configuration diagram PRIMERGY
System unit ( 3.5" HDDs )
SIDE VIEW
Hot plug power supplies
1. PSU 2. PSU
Memories
Memory CPU1
( Channel A + B + C + D )
Bank I (4 Modules)
Bank II (4 Modules)
Bank III (4 Modules)
Memory CPU2
( Channel E + F + G + H)
Bank I (4 Modules)
Bank II (4 Modules)
Bank III (4 Modules)
Memory ( III )
PCI Slots
Slot 9 PCIe-3 x4, 252mm @ CPU2
Possibility to install PCIe x8 cards
Slot 8 PCIe-3 x16, 252mm @ CPU2
Can be double width slot for GPGPU card!
Slot 7 PCIe-3 x4, 252mm @ CPU2
Possibility to install PCIe x8 cards
Slot 6 PCIe-3 x16, 252mm @ CPU2
Can be double width slot for GPGPU card!
Slot 5 PCIe-2 x4, 252mm @ CPU2
Possibility to install PCIe x8 cards
Slot 4 PCIe-3 x8, max. 180mm @ CPU1
Possibility to install PCIe x16 cards
Slot 3 PCIe-3 x8, max. 180mm @ CPU1
Slot 2 PCIe-3 x8, max. 180mm @ CPU1
Slot 1 PCIe-3 x8, max. 170mm @ CPU1
Reserved for modular LAN-Controller
Slot 10 PCIe-3 x8, max. 170mm @ CPU1
Internal - reserved for modular RAID-Controller
Key: Included in basic unit
One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.
3. PSU 4. PSU
CPUs
Xeon 4C, 6C or 8C
CPU incl. Heatpipe
Xeon 4C, 6C or 8C
CPU incl. Heatpipe
Processor ( II )
Xeon 4C, 6C or 8C
CPU with serial QPI
Interface and
4 memory channels
Option
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
FRONT VIEW
3 x 5.25" bays available
3 x HH 5.25" free or 2 x HH 5,25" free +
1 x HH 5,25" free + Option B
0 x HH 5.25" free + Option C
Option A
1.6 * 5.25"
1.6 * 5.25"
1.6 * 5.25"
Slim DVD
LSD Option
not used
Air - Channel Air - Channel
Accessible drives ( V )
Mounting Kit DVD(sl) + LSP/LSD:
- support for SL (0.5") DVD Drive + LSD (Local Service Display)
- occupies one 5.25" bay
MtK DVD(sl) + LSP/LSD + 2x SAS/SATA LFF HDD:
- support for 2x 3.5" SAS/SATA HDD hot plug
+ support for SL (0.5") DVD Drive + LSD (Local Service Display)
MtK DVD(sl) + 4x SAS/SATA LFF HDD:
- support for 4x 3.5" SAS/SATA HDD hot plug
+ support for SL (0.5") DVD Drive
2x internal USB
1x USSD
1x USB Port
( LP ready = Slots for low profile boards)
Status 2014-01-30
Option A or
or
Option B Option C
2x 1.6 * 5.25" 3x 1.6 * 5.25"
Slim DVD
1.6 * 5.25"
SAS / SATA
LSD Option
SAS / SATA
Slim DVD
SAS / SATA
SAS / SATA
SAS / SATA
SAS / SATA
Air - Channel
(Option A)
(Option
(Option C)
Hard disk drives ( VI )
3.5" SAS/SATA
Option D
4-port SAS backplane
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
4-port SAS backplane
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
1 * 3.5" SAS / SATA
B)
3 of 36