Configuration Of Your Appliance; Language; Clock; Permanent Extra Rinse - Electrolux EWT 1540 Instruction Book

3. CONFIGURATION OF YOUR
APPLIANCE
When your appliance is connected to the electrical
network, turn the programme selector on the Cotton posi-
tion. You can then configurate your washing machine ac-
cording the following parameters :

3.1. Language

When you switch on your washing machine for the first
time (programme selector on the cotton programme), the
language that will appear in the display window will be En-
glish.
Note: If you want to change this language, please follow
the following instructions :
• Press the "Spin"
(Zusatzfunktion) buttons simultaneously for at least 2
seconds,
• Press the "Change" button (Ändern) to select the
required language,
• Press the "Exit" button (Ausgang) to confirm your
choice.
Langage :
ENGLISH
Schleudern
Temperatur Zusatzfunktion

3.2. Clock

Setting the time is important because the end of cycle time
display depends on it. To set the time :
• Press the "Options" button (Zusatzfunktion) until the
"Setup" option appears,
• Press the "Change" button (Ändern) once to go into
the "Setup" option,
• Press the "Options" button (Zusatzfunktion) to select
the "Clock" menu,
• The time changes in minute stages just by pressing
the "Change" button (Ändern). The time changes in 10
minute stages by holding the "Change" button
(Ändern) down.
• Press the "Exit" (Ausgang) button to confirm your
choice. Then press it once more to go back to the pro-
gramme selection.
Clock :
Set time :
Schleudern
Temperatur
(Schleudern) and
Ändern
Ändern
Zusatzfunktion

3.3. Permanent extra rinse

Your washing machine is economical with water. But in
some cases, depending on the hardness of the water or if
you have sensitive skin, it may be useful to rinse with more
water.
• Press the "Options" button (Zusatzfunktion) until the
"Setup" option appears,
• Press the "Change" button (Ändern) once to go into
the "Setup" option,
• Press the "Options" button (Zusatzfunktion) to select
the "Rinse +" menu,
• Press the "Change" button (Ändern) to select the
Rinse + option or not (YES / NO in the display win-
dow),
• Press the "Exit" button (Ausgang) to confirm your
choice. Then press it once more to go back to the pro-
gramme selection
"Options"
When "Rinse +" mode is selected two additional rinses
take place in the Cotton programmes and one extra rinse
for the Synthetics and Delicates programmes. In addition,
the symbol
window.
Rinse +
Yes
Temperatur
Ausgang

3.4. Brightness

To set the brightness of the display window:
• Press the "Options" button (Zusatzfunktion) until the
"Setup" option appears.
• Press the "Change" button (Ändern) once to go into
the "Setup" option.,
• Press the "Options" button (Zusatzfunktion) to select
the "Brightness" menu,
• Press the "Change" button (Ändern) to set the required
brightness level,
• Press the "Exit"
choice. Then press it once more to go back to the pro-
gramme selection.
Brightness :
16.04
I--------->--------I
Temperatur
Ausgang
24
will appear in the options line in the display
Schleudern Zusatzfunktion
button (Ausgang) to confirm your
Schleudern
Zusatzfunktion
Ausgang
Ändern
Ändern Ausgang