36
Cleaning and Care
Changing the length of time for the pyrolytic cleaning
1. Proceed as described in the section "Pyrolytic cleaning".
2. As long as Duration
:
"2:15" or "3:15".
Duration
Pyrolytic cleaning then starts.
If Duration
form the setting procedure.
Changing the switch-off time for the pyrolytic cleaning
The switch-off time can be delayed using the clock function End
of the pyrolytic cleaning starting).
When the different Pyroluxes are set:
P2 - 2:15 = Pyroluxe menue light: For a light degree of soiling
P1 - 3:15 = Pyroluxe menue intensive: For a high degree of soiling
Oven lighting
Warning: There is a danger of electric shock! Prior to changing the oven light bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or switch off the circuit breaker.
Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Remove the glass cover by turning it anti-
clockwise and then clean it.
2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C
heat-resistant oven light bulb.
3. Refit the glass cover.
is flashing, select the desired length for the process using
flashes for approx. 5 seconds.
is no longer flashing, press the Selection
button again and then per-
(within 2 minutes
or