The Control Panel; G Water Full Indicator Light; G Buttons; G Mains-On Light - Zanussi TCS 683 W Instruction Booklet

Tumble dryer
Table of Contents

Advertisement

The Control Panel

CONDENSER DRYER
1 Programme Chart
This will help you to select the correct time for
drying.
2 Door Open Button
Depress this button to open the door.
The door of the machine can be opened at any time
during the programme if you want to feel the dryness
of the fabrics.
3 «Low Temperature» Button
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
4 «Start» Button
After selecting the drying time, press start button: the
appliance will start drying .
If the door is opened during drying, the
programme is interrupted. It will be resumed by
pressing the button again, once the door has been
closed.
This button must also be pressed after a power
cut.
5 Water Full Indicator Light
This light illuminates when the reservoir is full or
improperly fitted.
The programme will be interrupted, but the time
selector dial continues to turn towards the "0"
position. The laundry is not dried. After having
emptied the container, you have to select the drying
programme again for the time required to complete
drying.
Attention: after this operation, the dryer can remain
unactive for some minutes before starting the
programme and during this period the water container
light remains alight.
6 Time Selector Dial-On/Off
Switch
The selector dial incorporates two drying cycles, one
of up to 150 minutes at a high temperature for cotton
and linen, and one of up to 80 minutes at a low
temperature for synthetic fabrics. To set the machine
to the selected time, turn the dial clockwise until the
time you want coincides exactly with the pointer.
NEVER attempt to turn the dial in an
anticlockwise direction.
The drying time depends on:
- the speed of the last spin
- the desired degree of drying
- the type of laundry
- the size of the load.
When selecting the drying time you should remember
that it includes a 10 minute cooling phase (position
on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages to
the laundry.
7 Mains-On Light
This light indicates that the appliance is switched on
at the mains.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents