Table of Contents
Advertisement
Available languages
Available languages
5. T
ECHNICAL
Product
Maintenance
COLORstrip™ Mini FX User Manual
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. To maintain
optimum performance, clean the product at least twice a month.
However, usage and environmental conditions contribute to increasing the cleaning
frequency.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surfaces and fan vents.
4.
Clean the glass panel (laser aperture) with a mild solution of glass cleaner or
isopropyl alcohol.
5.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6.
Softly wipe any dirt or grime to the outside edges of the glass.
7.
Gently polish the glass surface until they are free of haze and lint.
Always dry the glass surfaces carefully after cleaning them.
Page 19 of 60
Advertisement
Table of Contents
