Table of Contents
Advertisement
4
Press the one-touch dial key that you want to program.
If the one-touch dial key that is pressed is already registered with a
recipient, the message "REGISTERED!" appears. Press the Menu
Select key, and then press a one-touch dial key with no recipient reg-
istered.
5
Enter the name of the one-touch dial to be programmed, and then press
the Menu Select key.
Text up to 20 characters long can be entered for the name.
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 73.
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)
6
Using the keypad, enter the fax number of the recipient, and then press
the Menu Select key.
The fax number can contain a maximum of 50 characters.
For details on entering/editing numbers, refer to "Entering Text" on
page 73.
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the number is being entered, press the Menu Select key,
and then press the Cancel/C key.)
7
Select the modem speed, and then press the Menu/Select key.
The entered information is programmed with the one-touch dial key, and
the message "SELECT REGIST.KEY" appears.
If a transmission error occurs, select 14.4 or 9.6 for the modem speed.
8
To program another one-touch dial key, press the one-touch dial key, and
then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
One-Touch Dialing
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
51
Advertisement
Table of Contents
