Table of Contents
Advertisement
Receiving Faxes Automatically
When the machine is turned off, faxes cannot be received. Therefore,
be sure to leave the machine turned on.
To print a received fax, change the paper type to PLAIN PAPER and
the paper size to A4, LEGAL, LETTER or OFICIO(Mexico only).
If the RX Mode parameter on the RX Setting menu is set to "Auto RX", no
special operation is needed in order to receive the fax. Reception begins after
the specified number of rings.
If the RX Mode parameter on the RX Setting menu is set "Manual RX",
the fax is not received automatically. For details, refer to "RX SET-
TING" on page 21.
If "Memory RX Mode" is set to "ON", printing does not begin automati-
cally after the fax is received. A received document is saved in the
memory and is printed at the time specified for "Memory RX Mode". In
addition, if "Memory RX Mode" is set to "OFF", the fax is printed. For
details on "Memory RX Mode" in the configuration menu, refer to "RX
SETTING" on page 21. For details on specifying the settings for
"Memory RX Mode", refer to "Setting Up the Memory RX Mode" on
page 27.
This machine does not support polling reception.
Receiving Faxes Manually
When the machine is turned off, faxes cannot be received. Therefore,
be sure to leave the machine turned on.
To print a received fax, change the paper type to PLAIN PAPER and
the paper size to A4, LEGAL, LETTER or OFICIO(Mexico only).
If a telephone is connected to this machine and the same line is used for
phoning and faxing, the fax can be received after picking up the telephone
receiver.
1
After the telephone rings, pick up the receiver.
If the telephone receiver is not picked up, reception begins automati-
cally, if the call is being received from a fax machine, after the number
of rings specified by "NO. of RINGS" on the RX SETTING menu. If the
call is being received from a telephone, the ringing will continue.
46
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
Receiving Faxes Automatically
Advertisement
Table of Contents
