MSI RG54SE User Manual page 32

USER MANUAL OF RG54SE WIRELESS 11g BROADBAND ROUTER
WAN Access Type
User Name
Password
Connection Type
Idle Time
MTU Size
DNS Mode
DNS 1
DNS 2
DNS 3
Clone MAC Address
Click to select PPPoE support on WAN interface. There
are user name, password, connection type and idle time
settings need to be done.
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
Select the connection type from pull-down menu. There
are Continuous, Connect on Demand and Manual three
types to select.
Continuous connection type means to setup the
connection through PPPoE protocol whenever this
Wireless Broadband Router is powered on.
Connect on Demand connection type means to setup the
connection through PPPoE protocol whenever you send
the data packets out through the WAN interface; there are
a watchdog implemented to close the PPPoE connection
while there are no data sent out longer than the idle time
set.
Manual connection type means to setup the connection
through the PPPoE protocol by clicking the Connect
button manually, and clicking the Disconnect button
manually.
If you select the PPPoE and Connect on Demand
connection type, fill in the idle time for auto-disconnect
function. Value can be between 1 and 1000 minutes.
Fill in the mtu size of MTU Size. The default value is
1400. Refer to 4.23 What is Maximum Transmission Unit
(MTU) Size?
Click Auto/Manual. If choose Manual, input at least DNS
info in DNS1/2/3.
Fill in the IP address of Domain Name Server 1.
Fill in the IP address of Domain Name Server 2.
Fill in the IP address of Domain Name Server 3.
Fill in the MAC address that is the MAC address to be
cloned.
Version: 1.0
24