MSI RG54SE User Manual page 15

Wireless 11g broadband router

Hide thumbs Also See for RG54SE:

Table of Contents

USER MANUAL OF RG54SE WIRELESS 11g BROADBAND ROUTER

Panel window will appear.

2. Move mouse and double-click the right button on Network and Dial-up Connections

icon. Move mouse and double-click the Local Area Connection icon. The Local Area

Connection window will appear. Click Properties button in the Local Area

Connection window.

3. Check the installed list of Network Components. If TCP/IP is not installed, click the

Add button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK

button to install the TCP/IP protocol, it may need the Microsoft Windows CD to

complete the installation. Close and go back to Network dialog box after the TCP/IP

installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is

good to connect the Wireless LAN Access Point.

IP Subnet Mask: 255.255.255.0

8. Click OK to completes the IP parameters setting.

For OS of Microsoft Windows NT:

1. Click the Start button and select Settings, then click Control Panel. The Control

Panel window will appear.

2. Move mouse and double-click the right button on Network icon. The Network

window will appear. Click Protocol tab from the Network window.

3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click

the Add button to install it; otherwise go to step 6.