Installation; Hardware Installation; Software Installation - MSI RG54SE User Manual

Wireless 11g broadband router

Hide thumbs Also See for RG54SE:

Table of Contents

USER MANUAL OF RG54SE WIRELESS 11g BROADBAND ROUTER

2 Installation

Step 1: Place the Wireless Broadband Router to the best optimum transmission location.

The best transmission location for your Wireless Broadband Router is usually at

the geographic center of your wireless network, with line of sign to all of your

mobile stations.

Step 2: Connect the Wireless Broadband Router to your wired network. Connect the

Ethernet WAN interface of Wireless Broadband Router by category 5 Ethernet

cable to your switch/ hub/ xDSL modem or cable modem. A straight-through

Ethernet cable with appropriate cable length is needed.

Step 3: Supply DC power to the Wireless Broadband Router. Use only the AC/DC

power adapter supplied with the Wireless Broadband Router; it may occur

damage by using a different type of power adapter.

The hardware installation finished.

There are no software drivers, patches or utilities installation needed, but only the

configuration setting. Please refer to chapter 3 for software configuration.

Notice: It will take about 50 seconds to complete the boot up sequence after

powered on the Wireless Broadband Router; Power LED will be active,

and after that the WLAN Activity LED will be flashing to show the

WLAN interface is enabled and working now.

Version: 1.0

Table of Contents