Table of Contents
Advertisement
5. 1 ch Surround Decoder Operations
.SPEAKER GAIN
This function sets speaker output level.
*
This function is not available for speakers whose
SPEAKER SEL setting is set to
OFF.
3-1. Touch the [SPEAKER GAIN] key to show
the submenu.
3-2. Touch the [FRONT L], [CENTER], [FRONT
R], [SURROUND R], [SURROUND L] or
[SUB WOOFER] key to set respective item.
3-3. Touch the key to make adjustments in the
range -10 dB to +10 dB in 1 dB step
increments. The default value is "0 dB".
• DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
*
This function is not available for speakers whose
"SPEAKER SEL" setting is set to
OFF.
.
3-1. Touch the [DELAY] key to show the
submenu.
3-2. Touch the [CENTER SP] or [SURROUND
SP] key to set respective item.
[CENTER SP]:
Adjustments are made in the range 0 ms to
5 ms. The default value is "0
ms".
[SURROUND SP]:
Adjustments are made in the range 0 ms to
15 ms. The default value is "0
ms".
• OOLBY D
This function sets the dynamic range
compression.
*
This function is not available for speakers whose
"SPEAKER SEL" setting is set to
OFF.
3-1. Touch the [DOLBY D] key to show the
submenu.
3-2. Touch the [MAX], [STD] or [MIN] key to
select respective item.
*The default value is [MAX].
4. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
DSFmode
DSF effect ON/OFF
*
The factory default setting is "OFF".
1. Press the [ADJ] button and touch the
[AUDIO] key.
2. Touch the [STATUS] key.
3. Touch the [DSF] key to select "ON" and
"OFF".
4. Each time the [DSF] key is touched, the on
and off statuses are switched alternately.
5. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Note:
• If the DSF effect is set to OFF, the adjustment
made in "DSF" is not reflected in the music
source.
Selecting the DSF type
1. Press the [ADJ] button and touch the
[AUDIO] key.
2. Touch the key for the desirable type to select it.
3. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
P.EQmode
P.EQ effect ON/OFF
*
The factory default setting is "OFF".
1. Press the [ADJ] button and touch the
[AUDIO] key.
2. Touch the [STATUS] key.
3. Touch the [P.EQ] key to select "ON" and
"OFF".
4. Each time the [P.EQ] key is touched, the on
and off statuses are switched alternately.
5. Touch the [RTN] key, [ESC] key, or press the
[ADJ] button.
Note:
• If the P. EO effect is set to OFF, the adjustment
made in "P.EO" is not reflected in the music
source.
VRX745VD
55
Advertisement
Table of Contents
