Loading And Unloading Cargo - Husqvarna 4421-D Owner's Manual

195
Figure 9 Bed Latch

LOADING AND UNLOADING CARGO

WARNING
• Firmly engage park brake before loading vehicle.
• Do not allow riders in the cargo bed.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Do not exceed rated vehicle capacity. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of control of
vehicle and possible severe personal injury or death.
• Do not load tailgate. The tailgate should be in the upright position and latched securely while the
vehicle is in motion.
• To help avoid shifting vehicle load and possibly overturning the vehicle, avoid sudden starts, sudden
stops and abrupt turns. Make sure cargo is well secured.
• Avoid top-heavy loads. The center of gravity of load should never exceed 15 inches (38 cm) above
the bottom of the cargo bed.
• The cargo's center of gravity may affect handling, steering, and braking of the vehicle. When the
vehicle is loaded, reduce speed and drive slowly in turns.
• Unload cargo bed before raising vehicle with a lift, hoist, or jack.
• Avoid stopping on a hill when loaded. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to overturn,
possibly resulting in severe personal injury.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the vehicle
to overturn or flip over backwards.
• Maximum cargo load must be reduced by the weight of optional equipment.
Center and secure cargo as far forward as possible in the cargo bed. Do not overload the vehicle. See Vehicle
Load Capacities on page 28 for vehicle capacities.
178
Figure 10 Prop Rod
2008 HUV 4421 Owner's Manual
Loading and Unloading Cargo
Page 27