Husqvarna 4421-D Owner's Manual page 53

2008 huv 4421 gasoline and diesel utility vehicles
Hide thumbs Also See for 4421-D:
Table of Contents

Advertisement

DANGER
– Eyes: Flush with water for 15 minutes. Call a physician immediately.
• Tools, wires, and metal objects can cause sparks when shorted across a battery.
WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle.
• Follow all instructions carefully when working with batteries.
• When jumping from a booster battery make final (negative) connection at engine frame.
• Do not jump start or charge a frozen or damaged battery. Unplug charger before connecting or
disconnecting cables to the battery. Never lean over battery while boosting, testing, or charging.
The battery in this vehicle is a 12-volt, low-maintenance battery that requires infrequent checks (Figure 36). Electrolyte
level should be checked semiannually.
222
Figure 36 Battery
1.
Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the NEUTRAL
position. Chock the wheels.
2.
Access the engine compartment. See WARNING "For vehicles with cargo beds..." in General Warnings
on page 12.
2.1. Remove the driver-side seat.
3.
Disconnect the battery cables, negative (–) cable first. See WARNING "To avoid unintentionally starting..." in
General Warnings on page 12.
4.
Use a flat-blade screwdriver, and carefully remove the battery cell caps from the battery. See following
WARNING.
1. Level Indicator 2. Cap 3. Plates
Electrolyte level at least 1/2 inch (13 MM) above plates or to level
indicator.
22
Figure 37 Battery Electrolyte Level
2008 HUV 4421 Owner's Manual
Battery
Page 51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4421-gxl4421-gxp4421-dxl4421-dxpHuv4421g

Table of Contents