Calling Cards; Receive Data Or Fax Calls - Nokia 6585 User Manual

Activate speed dialling
You can activate or deactivate speed
dialling. For more information, see
up speed dialling" on page

Calling cards

If you use a calling card for long distance
calls, you can save the calling card
numbers in your phone. Your phone can
store up to four calling cards.
SAVE INFORMATION
1 At the start screen, select
Settings > Call settings
card and press Select.
2 Enter your lock code and press OK.
3 Scroll to one of the four memory
locations and press
OK > Dialling sequence
Select.
4 Scroll to one of the following
sequence types and press Select:
Access number + phone number +
card number — Dial 1-600 access
number, phone number, then card
number (+ PIN if required)
Access number + card number +
phone number
number, card number (+ PIN if
required), then phone number
Prefix + phone number + card
number — Dial the prefix (numbers
that must precede the phone
number) and phone number you
want to dial, then card number
(+ PIN if required)
5 Enter the required information
(access number or prefix and card
number) and press
your entries.
6 Scroll to Card name
Select.
7 Enter the card name and press OK.
"Set
16.
Menu >
> Calling
Options > Edit >
and press
— Dial 1-600 access
OK to confirm
and press
Copyright © 2004 Nokia. All rights reserved.
Note: Contact your calling card
company for more information.
MAKE CALLS
After you have saved your calling card
information in your phone, you can make
a call using your calling card.
1 At the start screen, select
Settings > Call settings
card and press Select.
2 Enter your lock code and press OK.
(See "Change the lock code" on
page 41.)
3 Scroll to the calling card of your
choice, select Options
OK.
4 Press the End key to return to the
start screen; then enter the phone
number, including any prefix (such
as 0 or 1), that your calling card may
require when you make a calling
card call.
See your calling card for
instructions.
5 Press and hold the
seconds until Card call
6 When you hear the tone or system
message, press OK.

Receive data or fax calls

Data or fax calls is a Network Service. See
"Network services" on page 2
information.
If your wireless service provider supports
this feature, then you can set up the
phone to send or receive data or fax calls
when a terminal, such as a PDA or PC, is
connected.
For better performance during data calls,
place the phone on a stationary surface
with the keypad facing downward. Do
not move the phone by holding it in your
hand during a data call.
Settings (Menu 4)
Menu >
> Calling
> Select >
Talk key for a few
is displayed.
for more
35