Listen To Your Voice Messages; Automate Voice Mail - Nokia 6585 User Manual

Call and setup your voice
mail
1 Once you have saved the voice
mailbox number, press and hold the
1 key.
2 When you connect to voice mail and
the prerecorded greeting begins,
follow the service's automated
instructions to setup your voice
mail.
Listen to your voice
messages
Once you have setup voice mail, you can
dial the number in one of four ways:
• Dial the number using the keypad.
• Press and hold the 1 key.
• Press Listen if there is a notification
message in the display.
• At the start screen, select
Messages > Voice messages
Listen to voice messages
Select.
Once you connect and the
prerecorded greeting begins, follow
the automated instructions to listen
to your voice messages.

Automate voice mail

You can insert special characters called
"dialling codes" into phone numbers such
as voice mail, and save the number to a
speed dialling location. Dialling codes
instruct the receiving system to pause,
wait, bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services vary by
service provider. The following
instructions are examples of
common operations. Please
check with your service provider
for specific instructions for using
your voice mail service.
Menu >
>
and press
Copyright © 2004 Nokia. All rights reserved.
WRITE DOWN VOICE MAILBOX
NUMBER AND PROCESS
1 Write down your voice mailbox
number.
2 Call and check your voice mail as
you normally would.
3 Write down your interaction with
the recorded prompts step-by-step.
Keep in mind that each voice mail
service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds,
press 1, pause 2 seconds, press 1234,
press pound key.
Important: Be precise; you will
need this information in
voice mail with dialling codes"
on page 25.
INSERT DIALLING CODES
Press the * key repeatedly to cycle
through dialling codes. Once the desired
code appears in the display, pause briefly
and the code is inserted into the dialling
string.
The following dialling codes are available:
Dialling
Indicates...
code
* Bypasses a set of
instructions.
p Pauses for 2.5 seconds
before sending any numbers
that follow.
w Waits for you to press the
Talk key before sending the
numbers or codes that
follow.
SETUP VOICE MAIL WITH
DIALLING CODES
1 At the start screen, press
Speed dials, and press Select.
Messages (Menu 1)
"Setup
Contacts >
25