Remote Control - JBL LSR4312SP Owner's Manual

Reference - Remote Control
X
DIP switches are also used to restore factory settings. See page 33 in this manual for more information.
14. ACTIVE INPUT display – Whenever the LSR4312SP is powered on, one of these LEDs will be
lit, indicating whether the subwoofer is reproducing signal arriving at the analog input, or one of
the two digital inputs (S/DIF and AES/EBU). If a digital input is being used, the display also shows
whether the speaker is reproducing the left (Channel A), right (Channel B), or both sides of the
incoming stereo signal. For more information, see #10 on page 16 in this manual.
15. POWER connector – Accepts the supplied IEC power cable.
16. FUSE HOLDER – Holds the power fuse and one replacement power fuse.

Remote Control

The infrared wireless remote control provided in the LSR4300 Accessory Kit allows you to make
adjustments to your entire LSR4300 system without leaving the mix position. The remote control
duplicates all the controls found on the main speaker front panels such as power on, volume
adjust, soloing, input select, EQ adjustment and preset selection. Dedicated buttons are provided
to control subwoofer functions.
These are:
1. Bass Management ON/OFF - Toggles the bass management system ON or OFF.
2. Bass Management X OVER Settings - In conjunction with the +/- button, allows modifi cation of
1
2
4
LSR4300 Remote Control
22
3
5
Earlier version of the LSR4300 Remote Control