Controls And Connections; Panel Drawing - JBL EON15 G2 User Manual

Stereo Method 1
If the performance does not require the use of stage monitors you can use the MON and EFX2 /
MON2 outputs to create an independent stereo mix for recording. Connect your recorder to the
MON and EFX2 / MON2 outputs as shown and set the EFX2 / MON2 switch to the MON 2 position.
Connect your headphones to the recorder. Bring up the MON control of a mixer input channel to
record it to the left channel. Bring up the EFX2 / MON2 control of a mixer channel to record it to
the right channel. To center a mixer channel, set the MON and EFX2 / MON2 controls to the same
position. Note that MON and EFX2 / MON2 are not effected by the channel faders, so changes in
the live sound mix will not effect the recording.
Stereo Method 2
Connect your recorder to the CONTROL ROOM OUT jacks of your MusicMix 16 mixer. Disengage
all LISTEN switches. Disconnect the headphones from the mixer. Set the MIX / TAPE CD switch to
the MIX position (disengaged). The CONTROL ROOM & PHONES control will adjust the level of the
signal going to the recorder. Note that you will not be able to use the LISTEN system while recording.
You may monitor the recording by connecting headphones to the headphone jack of the recorder.
Direct to Multi-Track
Digital multi-track recorders are affordable and widely available. With the help of a simple 'Insert /
Direct Out Adapter' (see the illustration) it's possible to make a multi-track recording of a perform-
ance. Over-dubs can be added in the studio and a final mix can be perfected.

Controls and Connections

Panel Drawing

14