Product Overview The L75ms supports a variety of sources from wireless streaming via Bluetooth and Wi-Fi to hard wired sources such as a phono turntable or TV. While some connections are specific, others can be any device that matches that match the connections type.
Standard HDMI with ARC for use TV ARC Input. Only accepts 2ch PCM signals H AC Power Connect with supplied power cord. Main Power Switch Ensure switch is on Off position while connecting or disconnecting sources. L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/ Pg 5...
SFX (Sound Field sound field. Enhancement) Refer to Sound Field Enhancement (SFX) for more details. Note: Pressing any button on the remote will wake the L75ms from Standby. Pg 6 L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/...
Setting Boundary Compensation The L75ms was designed to be placed on top of a cabinet or table in a open area away from boundaries such as walls or cabinet surfaces. The bass contour switch is used to compensate for placing the speaker on cabinet shelf where side and top areas are close to the speaker.
Wi-Fi Direct Connection The Google home app is used to connect the L75ms to a Network for Android and Apple iOS devices. If you choose to not use Google Home and connect an Apple iOS device with Airplay, refer to...
3. Select the device named L75MS-XXXXX. The XXXXXX is the corresponding MAC address. 4. Select the network for the L75ms to use and select Next. 5. Follow the on-screen instructions to complete the setup of the L75ms as an Airplay speaker. Enabling and Disabling Network and Bluetooth Network and Bluetooth functionality may be turned Off should it be desired to do so.
Using the L75ms Wake from Standby The L75ms enters standby mode when the power button is pressed or after 10mins of no signal on a selected source. To wake the L75ms from standby perform one of the following operations. •...
The HDMI-ARC input will be automatically selected when the connected device is powered On regardless of standby state of the L75ms. It can also be selected by using the source select button on the top panel of the HDMI button on the remote.
Remote Control Type BTLE Dimensions with grille 8.5" H x 31.1" W x 11.3" D (216mm x 790mm x 287mm) Product Weight (Each) 35 lbs. (15.9kg) Pg 12 L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/...
Select another source on the TV or L75ms and then switch back to HDMI. Restoring Factory Defaults The L75ms can be reset to factory defaults should the need to arise. This will erase all settings for Network and Bluetooth requiring that all connections be reconfigured. BASS...
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Pg 14 L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/...
Need help?
Do you have a question about the L75ms and is the answer not in the manual?
Questions and answers