Dell Vostro 1000 PP23LB Owner's Manual page 86

Hide thumbs Also See for Vostro 1000 PP23LB:
Table of Contents

Advertisement

A R D
D I S K D R I V E R E A D F A I L U R E
H
-
down the computer, remove the hard drive (see "Hard Drive" on page 114),
and boot the computer from a CD. Then shut down the computer, reinstall
the hard drive, and restart the computer. If the problem persists, try another
drive. Run the Hard-Disk Drive tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 77).
I
N S E R T B O O T A B L E M E D I A
nonbootable CD. Insert a bootable CD.
I
N V A L I D C O N F I G U R A T I O N I N F O R M A T I O N
The system configuration information does not match the
R O G R A M
P
hardware configuration. The message is most likely to occur after a memory
module is installed. Correct the appropriate options in the system setup
program (see "Using the System Setup Program" on page 149).
K
E Y B O A R D C L O C K L I N E F A I L U R E
connection. Run the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 77).
K
E Y B O A R D C O N T R O L L E R F A I L U R E
connection. Restart the computer, and avoid touching the keyboard or the
mouse during the boot routine. Run the Keyboard Controller test in the Dell
Diagnostics (see "Dell Diagnostics" on page 77).
K
E Y B O A R D D A T A L I N E F A I L U R E
connection. Run the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 77).
K
E Y B O A R D S T U C K K E Y F A I L U R E
cable connection. Restart the computer, and avoid touching the keyboard or
keys during the boot routine. Run the Stuck Key test in the Dell Diagnostics
(see "Dell Diagnostics" on page 77).
M
E M O R Y A D D R E S S L I N E F A I L U R E A T A D D R E S S
A memory module may be faulty or improperly seated. Reinstall the memory
modules and, if necessary, replace them (see "Memory" on page 117).
M
E M O R Y A L L O C A T I O N E R R O R
conflicting with the operating system, another program, or a utility. Shut
down the computer, wait 30 seconds, and then restart it. Try to run the
program again. If the error message still appears, see the software
documentation.
86
Solving Problems
The hard drive may be defective. Shut
The operating system is trying to boot to a
-
P L E A S E R U N
For external keyboards, check the cable
For external keyboards, check the cable
For external keyboards, check the cable
For external keyboards or keypads, check the
The software you are attempting to run is
S
YS T E M
S
,
R E A D V A L U E E X P E C T I N G V A L U E
E T U P

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vostro 1000

Table of Contents