Table of Contents
Advertisement
4 Insert a plastic scribe into the guide on the side of the coin-cell battery compartment, and
pop the battery out.
coin-cell battery
When you replace the battery, insert it at a 30-degree angle under the clip with the positive
(identified by a plus [+] symbol) side up, and then push it into place.
Display
CAUTION:
Product Information Guide.
NOTICE:
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
working inside the computer.
1 Follow the procedures in "Before You Begin" on page 75.
2 Remove the hinge cover. See "Hinge Cover" on page 88.
86
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the safety instructions in the
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
To avoid damaging the system board, you must remove the main battery before you begin
Hide quick links:
Advertisement
Table of Contents
