Cd/Dvd Drive; Removing A Cd/Dvd Drive - Dell DIMENSION 8400 Manual

4
Connect the other end of the data cable to the connector labeled FLOPPY on the system
board (see page 75).
5
If you are installing a new floppy drive rather than replacing a drive, remove the front-panel
inserts (see page 98).
6
Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
7
Close the computer cover. (see page 107).
NOTICE:
the computer.
8
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
9
Enter system setup (see page 113) and select the appropriate Diskette Drive option.
10
Verify that your computer works correctly by running the Dell Diagnostics (see page 55).

CD/DVD Drive

CAUTION:
located in the Product Information Guide.
CAUTION:
before opening the cover.

Removing a CD/DVD Drive

1
Follow the procedures in "Before You Begin" on page 63.
2
Disconnect the power and data cables from the back of the drive.
102
Removing and Installing Parts
To connect a network cable, first plug the cable in to the network device and then plug it in to
Before you begin any of the procedures in this section, follow the safety instructions
To guard against electrical shock, always unplug your computer from the electrical outlet