Sound Control; Sound Menu - JVC AV-21FT1BUG Instructions Manual

SOUND CONTROL

Volume adjustment
Use the remote control VOLUME UP (A14) /
DOWN (A13) buttons or the TV set front panel
VOLUME UP / DOWN buttons (B9).
P
or
P
Mono forcing, dual language
- If you are unable to get good sound quality for a
program due to poor reception, you can force a
change from stereo to mono transmission by
pressing the remote control MODE button (A26).
Then the program status display will indicate
"MONO" in red.
I/II
- On the other hand, during a program with dual
language transmission, the MODE button (A26)
allows you to toggle between the first and second
language. The program status display will indicate
"DUAL 1" or "DUAL 2" (plus NICAM according to the
received signal) instead of Stereo or Mono.
- To return to initial state, press again the MODE
button (A26).

SOUND MENU

Select SOUND menu from the MAIN menu.
- Select VOLUME function to adjust the volume level.
- Select the BASS and TREBLE functions to adjust the tone levels.
- Select BALANCE function to adjust sound balance between the
left and right speakers. If the indicator is highlighted in red, then
the central balance position has been found.
Mute
Mute the sound by pressing the remote control SOUND
-
MUTE button (A1).
- Then, logo is displayed. The previous sound setting is
returned after pressing the same button a second time.
- If a sound related function is used (e.g. VOLUME,
the MUTE will also be cancelled.
Sound effects
A SPATIAL sound effect is available, by using the remote
control (A5) button.
The following display appears:
SPATIAL
STEREO
18:20
To return to initial sound effect, press again the
The following display appears:
OFF
STEREO
18:20
For other adjustments such as BASS or TREBLE, BALANCE,
use the SOUND menu (here under).
VOLUME
BASS
TREBLE
BALANCE
) then
PICTURE/OK
Spatial sound effect
Sound transmission mode
Clock
(A5) button.
No sound effect
Sound transmission mode
Clock
SOUND
7