Table of Contents
Advertisement
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME UP (A14) /
DOWN (A13) buttons or the TV set front panel
VOLUME UP / DOWN buttons (B8).
P
or
P
Mono forcing, dual language
- If you are unable to get good sound quality for a
program due to poor reception, you can force a
change from stereo to mono transmission by
pressing the remote control MODE button (A26).
Then the program status display will indicate
"MONO" with a (
) icon.
I/II
- On the other hand, during a program with dual
language transmission, the MODE button (A26)
allows you to toggle between the first and second
language. The program status display will indicate
"DUAL 1" or "DUAL 2" (plus NICAM according to the
received signal) instead of Stereo or Mono.
- To return to initial state, press again the MODE
button (A26).
SOUND MENU
Select SOUND menu from the MAIN menu.
- Select VOLUME function to adjust the volume level.
- Select BALANCE function to adjust sound balance between the left
and right speakers. If the indicator is highlighted in red, then the
central balance position has been found.
- Select the BASS and TREBLE functions to adjust the tone levels.
Mute
Mute the sound by pressing the remote control SOUND
-
MUTE button (A1).
- Then,
returned after pressing the same button a second time.
- If a sound related function is used (e.g. VOLUME,
the MUTE will also be cancelled.
Sound effects
-
+
A SPATIAL sound effect is available, by using the remote
control
The following display appears:
To return to initial sound effect, press again the
The following display appears:
For other adjustments such as BALANCE, BASS or TREBLE,
use the SOUND menu (here under).
logo is displayed. The previous sound setting is
(A5) button.
PICTURE/OK
SPATIAL
STEREO
1 8: 30
OFF
STEREO
18: 30
SOUND
V O L U M E
B A L A N C E
B A S S
T R E B L E
) then
Spatial sound effect
Sound transmission mode
Clock
(A5) button.
No sound effect
Sound transmission mode
Clock
7
Advertisement
Table of Contents
