Features Menu; Language Selection - JVC AV-21FT1BUG Instructions Manual

FEATURES MENU

Select the FEATURES MENU from the main MENU as follows :
MENU
Press on the button MENU
FEATURES menu contains the following sub-menus.
1. LANGUAGE selection (see below).
2. When CHILD LOCK is set to ON,
Prevents the use of the TV set without
remote control.
3. TV Clock setting
When TV is turn on with MAIN POWER
button (B1), clock will be set automatically
with Program N° 1 teletext signal, if
transmitted.
If you turn off the TV with MAIN POWER
button, the clock setting is lost.
4. Wake up function
This function is available when the clock is
set and TV is set in stand-by mode. The TV
sets turns on automatically at the WAKE
TIME and with the WAKE UP TV
programme number entered.
5. Shared with WAKE TIME.
6. Noise Reduction is picture noise reduction
feature.

LANGUAGE SELECTION

Select LANGUAGE selection from the FEATURES menu.
The following languages are available :
BG > CZ > > D > DK > E > F > FIN > GB > GR > H > I > N > NL > PL > RO > RUS > S > SK
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A13), RIGHT (A14) buttons.
- Press MENU button twice to confirm the selection and exit from the MENU.
Note : The languages shown are subject to modification without prior notice.
P
P
Position cursor on FEATURES menu
FEATURES
LANGUAGE
CHILD LOCK
CLOCK
WAKE TIME
WAKE PROG.
NOISE RED.
PICTURE/OK
Press on the OK button
1. The currently selected LANGUAGE is
displayed. Press CURSOR LEFT (A13) /
RIGHT (A14) to change the selection.
2. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator
flashes red and green to indicate the
CHILD LOCK is set.
- The front panel TV buttons (B10) become
inactive and the TV will only respond to the
GB
remote control.
OFF
3. TV clock timer can be also entered
14:30
manually. By manual clock setting, clock
07:15
will start at 00 seconds upon entry of the
04
4th figure.
ON
4. - Switch the WAKE UP function 'OFF' or
'ON' (the time will be shown e.g. 07:15)
with the remote control CURSOR LEFT
(A13) / RIGHT (A14) buttons.
- Enter the wake up time with the remote
control 0..9 NUMBER (A3) buttons.
5. Select WAKE UP TV program number.
6. Adjust to be ON or OFF.
- When ON, the Noise Reduction is active
for all programs (0 to 99).
- When OFF, the function is inactive.
.
9
9