Page 1: Table Of Contents
INSTRUCTIONS 2 Insert the batteries into the remote control ... 3 3 Connecting the aerial and VCR ....4 Thank you for buying this JVC 4 Connecting other devices ......5 colour television. 5 Connect the power cord to the AC outlet ... 5 To make sure you understand how to 6 Initial setting ..........
Page 2: Safety Precautions
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug.
Page 3: Preparation
Preparation 1 Confirm which remote control you have Your TV comes with one of the four remote controls shown below. Functions you can operate differ depending on the type of remote control. <AV-21WS3/AV-25LS3 <AV-20NX3/AV-21DX3 <AV-21LS2/AV-29LS2> <AV-21LX2/AV-29LX2> /AV-29WS3> /AV-21FX3/AV-21WX3 /AV-25KX3/AV-25LX3 AV-29WX3> POWER POWER POWER...
Page 4: Connecting The Aerial And Vcr
Preparation 3 Connecting the aerial and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. •...
Page 5: Connecting Other Devices
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. •...
Page 6: Initial Setting
OPERATE BY -+ D I SPLA Y • The JVC logo does not appear if your TV has been turned on once before. In this case, use the LANGUAGE and AUTO CH PRESET functions to perform the initial settings. For details, see pages 17 and 19.
Page 7: Basic Operation
Basic operation 1 Press the POWER button to turn • The illustration below is for the remote control RM-C1010. Depending on the applicable mod- your TV on. els, the remote controls may not look exactly • If your TV does not turn on, press the Main the same.
Page 8: Remote Control Buttons And Functions
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour system contrast according to the brightness of your to another colour system.
Page 9: Button
Remote control buttons and functions button CINEMA SURROUND button < S series only > < AV - 21 L S 2 / AV - 21 L X 2 / AV - 2 9 L S 2 / AV-29LX2 does not included >...
Page 10: Off Timer Button
Remote control buttons and functions OFF TIMER button RETURN + button You can set the TV to automatically turn off You can set a channel you frequently view after a set time. to the Return Channel and you can view that channel at any time with one-touch.
Page 11: Viewing Teletext Programmes
Viewing teletext programmes < S series only > Using the List Mode You can store the numbers of your favourite Ι/ΙΙ TV/TEXT teletext pages in the List mode and call them TV/TEXT up quickly using the coloured buttons. TV/VIDEO To store the page numbers:...
Page 12 Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. In the List mode: Each time you press the REVEAL button, Returns to the page number displayed in the text is hidden or revealed.
Page 13: Using The Tv's Menus
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU buttons to change function settings. SYSTEM CINEMA COLOUR SOUND...
Page 14: Input
Using the TV’s menus INPUT You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1”...
Page 15: Auto Shutoff
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals You can mute the sound and change the are received for about 15 minutes or longer picture into a blue screen while no signals after the end of a broadcast.
Page 16: Video-2 Set
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to You can adjust the picture as you like. the video signal input from the external 1 Press MENU T to display the device connected to the VIDEO-2 terminal. “MENU 4”...
Page 17: Ai Volume
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or You can automatically preset all TV channels decrease of volume that occurs when that can be received by your TV to channels. changing channels or switching VIDEO 1 Press MENU T to display the modes.
Page 18: Manual Ch Preset
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. 1 Press MENU T to display the MANUAL FINE “MENU 3”...
Page 19: Skip
• Channels to which TV channels have not been TEXT LANGUAGE preset are automatically set to be skipped. < S series only > 1 Press MENU T to display the “MENU 3” menu, then select You can select one of 5 teletext language “MANUAL CH PRESET”.
Page 20: Tv Buttons And Parts
TV buttons and parts Front <AV-29WS3/AV-29WX3> L/MONO IN (VIDEO-3) <AV-29LS2/AV-29LX2> L/MONO IN (VIDEO-3) <AV-25KX3> L/MONO MENU CHANNEL VOLUME POWER POWER (VIDEO-3) EXIT <AV-21WS3/AV-21WX3> POWER MENU CHANNEL VOLUME L/MONO EXIT IN (VIDEO-3) <AV-21LS2/AV21LX2/AV-25LS3/AV-25LX3>...
Page 21 TV buttons and parts <AV-21DX3> POWER POWER <AV-20NX3/AV-21FX3> MENU CHANNEL VOLUME POWER POWER L/MONO EXIT IN (VIDEO-3) 1 Headphone jack 7 ECO sensor 2 VIDEO-3 terminal 8 Remote control sensor 3 MENU button 9 SUB POWER lamp 4 CHANNEL m buttons 0 POWER lamp 5 VOLUME m buttons - Main power button...
Page 22: Using The Buttons On The Tv
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function You can operate functions in menus using is set to “OFF”. When the CHILD LOCK function the front control buttons on the TV. is set to “ON”, the TV cannot be operated using the front control buttons.
Page 23: Troubleshooting
(see page 8.) PICTURE TILT function to adjust the tilt. (see page 14.) • Adjust the sound settings. (see page 16.) < S series only > • If there is noise during mono sound output, press the button to select “MONO”.
Page 24: Specifications
Teletext system < S series only > FLOF (Fastext), WST (World Standard Text) Language displayed by teletext < S series only > Please see the table in the description “TEXT LANGUAGE” on page 19. Sound-multiplex systems < S series only >...
Page 25 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...

This manual is also suitable for:

X series Av-21ls2 Av-21ws3 Av-25ls3 Av-29ls2 Av-29ws3 ... Show all

JVC S Series Instructions Manual

Quick Links

Related Manuals for JVC S Series

Summary of Contents for JVC S Series

This manual is also suitable for:

Table of Contents