Transport Instructions - Genie 82784 Operator's Manual

Second Edition • Second Printing
Observe and Obey:
Common sense and planning must be applied to
control the movement of the machine when
lifting it with a crane or forklift.
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
The machine must be on a level surface or
secured before releasing the brakes.
Securing to Truck or Trailer for
Transit
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Use chains or straps of ample load capacity.
Use a minimum of 2 chains or straps.
Adjust the rigging to prevent damage to the chains.
Part No. 82784

Transport Instructions

Brake Release
Operation
1 Chock the wheels to prevent
2 Be sure the winch line is properly secured to the
3 Turn the brake release knob counterclockwise
4 Pump the brake release pump knob.
After the machine is loaded:
1 Chock the wheels to prevent the machine from
2 Turn the brake release knob clockwise to reset
Towing the Genie GS-2032 or the GS-2632 is not
recommended. If the machine must be towed, do
not exceed 3.2 km/h.
Genie GS-2032 and Genie GS-2632
the machine from rolling.
drive chassis tie points and the path is clear of
all obstructions.
to open the brake valve.
rolling.
the brakes.
Operator's Manual
27