Genie 82784 Operator's Manual page 25

Second Edition • Second Printing
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Auxiliary Lowering/Manual
Lowering
1 Activate the auxiliary lowering/manual lowering
function. Move the toggle switch OR pull the
knob OR push the button.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Move the up/down toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
Part No. 82784
To Position Platform
1 Press the lift function select button.
2 Press and hold the function enable switch on the
3 Move the control handle according to the
When lowering the platform, the platform should
stop when it is 2.1 m from the ground. Be sure the
area below the platform is clear of personnel and
obstructions before continuing. To continue
lowering, release the control handle, wait 5
seconds, then move the control handle again.
To Steer
1 Press the drive function select button.
2 Press and hold the function enable switch on the
3 Turn the steer wheels with the thumb rocker
Genie GS-2032 and Genie GS-2632
OPERATING INSTRUCTIONS
control handle.
markings on the control panel.
control handle.
switch located on the top of the control handle.
Operator's Manual
23