LOCAL CONTROL Front DTB-21S7 DTB-21S6 Side B1 MAIN POWER button B2 STAND-BY indicator B3 REMOTE sensor B4 PROGRAM UP/DOWN buttons B5 VOLUME UP/DOWN buttons B6 TV / AV button B7 MENU button B8 SIDE VIDEO INPUT socket B9 SIDE AUDIO INPUT (L + R) socket...
VENTILATION Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as in a bookcase or built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit. OBJECT ENTRY Do not insert foreign objects, such as needles and coins, in the ventilation openings.
START UP LANGUAGE MENU The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later section under MENU DESCRIPTION).
Side TV/AV SELECTION Allows to switch between TV and external modes. By repeatedly pressing the remote control TV / AV (A5) or the TV side panel TV / AV (B7) button, the on-screen display is changed as shown : S-VIDEO 2 Remark: If the signal source from the rear SCART1 socket (AV1) is RGB (e.g.
Page 7
PROGRAM SELECTION (FROM 0 TO 99) Direct selection Up / Down selection Use the remote control NUMBER 0….9 buttons (A3). Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the For two digits program numbers, enter the second digit within 2 seconds. TV set front panel PROGRAM UP / DOWN buttons (B4).
PICTURE CONTROL You can select three pictures settings, by using the remote control NORMAL button (A17) : - Normal I (standard hard picture) - Normal II (standard soft picture) - Favourite For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu. If an NTSC signal is received, then the TINT adjustment will also be available.
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK SETTING, WAKE UP, NOISE REDUCTION These functions are available in the Features menu (see description page 13). CHILD LOCK Alternatively, the user can enter the time manually using the CLOCK function. However, if this is done the clock will not be periodically This function only allows the TV to be turned on using the remote updated as would happen if the time is set automatically.
PICTURE MENU (For operating instructions, see page 9, HOW TO USE THE SUB-MENUS) - Select and adjust the level of each function : BRIGHTNESS, CONTRAST, PICTURE PICTURE FAVOURITE FAVOURITE COLOUR, SHARPNESS, TINT (if available). - The above modified values are automatically stored in FAVOURITE mode. BRIGHTNESS - NOISE REDUCTION feature can be activated or not.
INSTALL MENU (For operating instructions, see page 9,HOW TO USE THE SUB-MENUS) Automatic tuning system INSTALL INSTALL Program list edition Country ATSS TV system modification TV system EDIT SYSTEM Channel number Channel number CHANNEL Channel Frequency Channel Frequency FREQUENCY 671,25 NAME ABCDEFG Channel name...
Page 12
Channel skipping Channel deleting Channel order changing - You can select skip „YES” or - Select the program to delete using - Select the program to move using the „NO” using the remote control the remote control CURSOR UP remote control CURSOR UP (A6) / DOWN RED „Skip”...
FEATURES MENU See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 9, HOW TO USE THE SUB-MENUS) 1. When switched to ON: 1. Adjust this value ON or OFF. Prevents the use of the TV set without remote - In stand-by mode, the stand-by indicator flashes control...
TELETEXT ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( ) button (A22) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. - To return to TV mode, press again the TELETEXT ( ) button (A22).
Page 15
TELETEXT FORMAT PICTURE & SOUND CONTROL Doubling character height Repeatedly pressing the HEIGHT ( ) button (A23) doubles the character height in the following order: Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height. If the page is in UP or DOWN mode, then normal size is automatically set if : - A new page request is made (e.g.
Need help?
Do you have a question about the DTB-21S7 and is the answer not in the manual?
Questions and answers