Ui-View32 Setup - Argent Data Systems OpenTracker USB User Manual

OpenTracker USB User's Manual 40

15. UI-View32 Setup

For use with the UI-View32 APRS client, either port of the tracker can be set
manually to KISS mode. No configuration commands are needed in UI-View32
once this has been accomplished.
In this example, port A has been set to KISS mode at 9600 baud using the tracker
configuration utility. The console commands AMODE KISS and ABAUD 9600
produce the same result.
The baud rate selected in the UI-View32 'Comms Setup' screen must match the
rate selected for the port in use. Select host mode 'KISS', and be sure to choose
the correct COM port for your PC. Click on 'Setup' to continue configuration.