Warm Boot Vs. Cold Boot; Working Offline; Main Configuration Window - Argent Data Systems OpenTracker USB User Manual

OpenTracker USB User's Manual
11.4.

Warm Boot vs. Cold Boot

If the unit is already powered on and operating when you click the 'Connect'
button, the program attempts a 'warm boot' operation to put the device into
configuration mode. If the firmware has been corrupted, i.e. by a failed upgrade,
it may fail to enter configuration mode. You can correct this by performing a
'cold boot' - power the unit off and power it on again after clicking 'Connect'.
11.5.

Working Offline

If you need to edit a configuration without connecting the tracker, click the
'Offline' button. You will need to have a saved configuration file to work from.
11.6.

Main Configuration Window

12