Page 1
BASSADVANCEDTUBETECHNOLOGY PREAMWRECORDINGAMIP @Bass @MID @TREBLE @UK PREIPOST Gi#IN= T O N E = YClSTER POIlER INSTRUCTION MANUAL...
Page 2
The tone controls are very effective and precise, and the boost functions offer instanteanous access to several fundamentally different kinds of sound. A full complement of connecting jacks make the BATT ideal in a broad range of applications from rehearsal to studio to stage.
Page 3
CONTROLS AND CONNECTION JACKS INPUT: The BATT has two input jacks, on the front and one at the back The input sensitivity of both are equal, and either can accommodate active or passive basses. The front panel input has priority, i.e. Instrument Input 2 on the back is automatically disconnected when the front panel jack is in use.
Page 4
BOOST SWITCHES: The three black pushbutton-switches for Bass, Mid, and Treble, are specially contoured to offer a dramatic amount of tonal control instantaneously. BASS: Boosts the frequency range from 80 to 400 Hz by approximately + 6 dB, bringing out fundamentals more strongly and adding a clearly audible “punch” in the low bass region.
Page 5
Bass Advanced Tube Technology Amp / Preamp possesses a versatile array of jacks making the BATT at home in every conceivable situation, be it stage, studio, or practice. You can connect it to any speaker cabinet directly and use it as a practice amp head.
Page 6
BATT as a P LINE OUT: used to feed the power amplifier when the BATT is acting as a preamplifier in a complete rig. The output from the BATT is connected to the input of the power amplifier, and the output of the power amp is connected to the speaker cabinet.
Page 7
STAGEBOARD connected to both can switch between the two. PLEASE NOTE: VALVES NEED TO REACH THEIR CORRECT OPERATING TEMPARATURE FOR THIS REASON, THE BATT NEEDS A FEW MOMENTS TO WARM UP AFTER SWITCHING ON BEFORE IT IS READY FOR USE. VALVES GENERATE HEAT,MAKESURETHATTHE AIRVENTSARE NOT BLOCKED.
Page 8
BATT SUGGESTED CONFIGURATION The sounds suggested here can only be rough indication, as they will vary considerably depending on the instrument used and your playing technique. Once you have set-up a basic sound which you like, the boost functions and the pre/post power amp switch provide instant access to different sounds.
Need help?
Do you have a question about the BATT and is the answer not in the manual?
Questions and answers