Related Manuals for Gaggenau CK 270-604
Summary of Contents for Gaggenau CK 270-604
- Page 1 Operating and Assembly Instructions CK 270-604 Glass-ceramic hob with Superquick cooking zones...
-
Page 2: Table Of Contents
CK 270-604 Preface Important safeguards Page 3-4 1. Important notes Page 5-6 1.1 For your safety Page 5 1.2 Operating for the first time Page 5 1.3 About use Page 6 2. Structure and operating principle Page 7 2.1 Structure Page 7 2.2 Operating principle... -
Page 3: Preface
Preface Cooking with your new glass-ceramic cooker will be even more fun than before. The appliance offers you the following advantages: – The appliance features SuperQuick cooking zones. It therefore heats up in a very short time. – Thanks to the novel installation method implemented, installation is child's play! To ensure that you will be able to use this appliance in all its diversity, read through... -
Page 4: Important Safeguards
Important safeguards Read All Instructions. 4. a) Use Proper Pan Size – This appliance is equipped with one or more surface units of different size. Select utensils having flat 2. To eliminate the risk of burns or fire by reaching bottoms large enough to cover the surface over the heated surface units, cabinet storage unit heating element. - Page 5 6. CAUTION: Do not store items of interest to children in cabinets above a range. Children climbing on the appliance to reach items could be seriosly injured. 7. DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot even though they are dark in color.
-
Page 6: Important Notes
1. Important notes 1.1 For your safety 1.2 Operating for the first time – You must not operate the appliance if it is Before operating the appliance for the first time, damaged. please pay attention to the following notes: – The appliance must only be connected by an –... -
Page 7: About Use
In the event of malfunctions, first check your household fuses. If a problem has nothing to do with the power supply, please contact your specialist dealer or your responsible Gaggenau after-sales service. Built-in temperature protection prevents over- heating of the appliance and of build-in furniture. -
Page 8: Structure And Operating Principle
2. Structure and operating principle 2.1 Structure 1 SuperQuick cooking zone Ø 145 mm / 5 ” (1200 W) 2 SuperQuick cooking zone Ø 145 mm / 5 ” (1100 W) ; can be switched to 145 x 240 mm / 5 ”... -
Page 9: Operation
3. Operation Switching on: Switching on without combination: Turn the corresponding control knob to the left or right to the required cooking level (1-9). The power is set continuously variably. Note: A few seconds after switching on, the individual residual heat display indicating the chosen cooking zone lights up in the residual heat display panel. -
Page 10: Cleaning And Care
Remove baked-in food remainders and coarse dirt with our small scraper (nr.: 087670). Clean the cooking surface regularly with the Gaggenau cooker cleaner (nr.: 098690). Note: to avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-... -
Page 11: Maintenance
If your appliance should not function properly, search for the fault in the list below. If you are not successful in remedying the fault with the aid of the list below, then contact your Gaggenau after-sales service. Fault... -
Page 12: Assembly Instructions
(of a permanent connecting lead), an isolating device with a contact gap of at least 3 mm must be installed (e.g. domestic fuse). CK 270-604 FD xxxx – No warranty claims can be lodged for any AC 208/220-240 V 60 Hz... - Page 13 The minimum spaces that must be maintained between the appliance cooking surface and the horizontal surface above the cooking top shall be: A = 30 inches (762 mm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or A = 24 inches (600 mm) minimum when bottom of wood or metal cabinet is protected by no less than -inch-thick flame-retardant millboard covered...
-
Page 14: Installation
6.3 Installation – Produce the recess for one or several Vario appliance(s) in your worktop. Proceed as indicated on the installation sketch and the dimension table. The dimension table contains details of the space requirement for the trim between the appliances. Important: the angle between the cut surface and the worktop must amount to 90°... - Page 15 GAGGENAU HAUSGERÄTE GMBH 5551 McFADDEN AVENUE CARL-WERY-STR. 34 · 81739 MÜNCHEN HUNTINGTON BEACH, CA 92649 GERMANY Y (0 89) 45 90 - 03 Y (800) 828-9165 · FAX (714) 901-0979 FAX (0 89) 45 90 - 23 47 www.gaggenau-usa.com...