Gaggenau CK 270 Operating And Assembly Instructions Manual

Gaggenau CK 270 Operating And Assembly Instructions Manual

Glass-ceramic hob with superquick cooking zones

Advertisement

Quick Links

Operating and Assembly Instructions
CK 270
Glass-ceramic hob with Superquick cooking zones
0
0
0
0
1
9
1
9
1
9
1
9
3
7
3
7
3
7
3
7

Advertisement

Table of Contents
loading

Summary of Contents for Gaggenau CK 270

  • Page 1 Operating and Assembly Instructions CK 270 Glass-ceramic hob with Superquick cooking zones...
  • Page 2: Table Of Contents

    CK 270 Preface 1. Important notes Page 3-4 1.1 For your safety Page 3 1.2 Operating for the first time Page 3 1.3 About use Page 4 2. Structure and operating principle Page 5 2.1 Structure Page 5 2.2 Operating principle Page 5 2.3 Energy saving tips...
  • Page 3: Preface

    Preface Cooking with your new glass-ceramic cooker will be even more fun than before. The appliance offers you the following advantages: – The appliance features SuperQuick cooking zones. It therefore heats up in a very short time. – Thanks to the novel installation method implemented, installation is child's play! To ensure that you will be able to use this appliance in all its diversity, read through...
  • Page 4: Important Notes

    1. Important notes 1.1 For your safety 1.2 Operating for the first time – You must not operate the appliance if it is Before operating the appliance for the first time, damaged. please pay attention to the following notes: – The appliance must only be connected by an –...
  • Page 5: About Use

    In the event of malfunctions, first check your household fuses. If a problem has nothing to do with the power supply, please contact your specialist dealer or your responsible Gaggenau after-sales service. Built-in temperature protection prevents over- heating of the appliance and of build-in furniture.
  • Page 6: Structure And Operating Principle

    2. Structure and operating principle 2.1 Structure 1 SuperQuick cooking zone Ø 145 mm (1200 W) 2 SuperQuick cooking zone Ø 145 mm (1100 W) can be switched to 145 x 240 mm (2000 W) 3 SuperQuick cooking zone Ø 180 mm (1800 W) 4 Control knob for front right cooking zone 5 Control knob for rear right cooking zone 6 Display panel for residual heat...
  • Page 7: Operation

    3. Operation Switching on: Switching on without combination: Turn the corresponding control knob to the left or right to the required cooking level (1-9). The power is set continuously variably. Note: A few seconds after switching on, the individual residual heat display indicating the chosen cooking zone lights up in the residual heat display panel.
  • Page 8: Cleaning And Care

    Remove baked-in food remainders and coarse dirt with our small scraper (nr.: 087670). Clean the cooking surface regularly with the Gaggenau cooker cleaner (nr.: 098690). Note: to avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-...
  • Page 9: Maintenance

    If your appliance should not function yourself properly, search for the fault in the list below. If you are not successful in remedying the fault with the aid of the list below, then contact your Gaggenau after-sales service. Fault Possible cause...
  • Page 10: Assembly Instructions

    3 mm must materials without taking additional measures. be installed (e.g. domestic fuse). – No warranty claims can be lodged for any CK 270-504 FD xxxx damage resulting from failure to observe AC 240 V...
  • Page 11: Installation

    6.3 Installation – Produce the recess for one or several Vario appliance(s) in your worktop. Proceed as indicated on the installation sketch and the dimension table. The dimension table contains details of the space requirement for the trim between the appliances. Important: the angle between the cut surface and the worktop must amount to 90°...
  • Page 12 GAGGENAU HAUSGERÄTE GMBH CARL-WERY-STR. 34 · D - 81739 MÜNCHEN Y (0 89) 45 90 - 03 FAX (0 89) 45 90 - 23 47 www.gaggenau.com...

Table of Contents