Installation Steps; Installing The I/O Shield; Installing The Desktop Board - Intel D845GLVA Quick Reference

Installation Steps

1 Installing the I/O Shield

The desktop board comes with an I/O shield. When installed in the chassis, the
shield blocks radio frequency transmissions, necessary to pass emissions (EMI)
certification testing, protects internal components from dust and foreign objects,
and promotes correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place the
shield inside the chassis as shown in Figure 2. Press the shield into place so that
it fits tightly and securely. If the shield doesn't fit, obtain a properly-sized
shield from the chassis supplier.

2 Installing the Desktop Board

CAUTION
Failure to use an ATX12V or SFX-12V power supply, or not connecting the
additional power supply lead to the Desktop Board D845GLVA may result
in damage to the desktop board and/or power supply.
For more information on the ATX12V and SFX-12V power supply, refer to
the Intel Desktop Board D845GLVA Product Guide on the Intel Express
Installer CD-ROM.
Refer to your chassis manual for specific instructions on installing and removing
the desktop board. Secure the desktop board to the chassis standoffs using the
screws.
Desktop Board D845GLVA is secured to the chassis with six screws. Refer to
Figure 1 on page 4 for the location of the mounting screw holes.
Intel Desktop Board D845GLVA Quick Reference
Figure 2. I/O Shield
OM13621
7