Quick Select Name; Remote Id Setup; J 2Way Remote; Display - Denon AVR-1909 Owner's Manual

g Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! # % & ' ( ) * + , - . / : ; = " ? @ [ \ ] (space)
Default
Reset the settings to the default values.
h Remote ID Setup
Set remote control ID.
1 2 3
[Selectable items]
NOTE
When using the AVR-1909 with only the included remote control
unit (RC-1099), use Remote ID "1" (default).
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
j 2Way Remote
Make setting for 2-way remote control unit.
[Selectable items]
Used
: Use 2-way remote control.
Not Used
: Do not use 2-way remote control.
When using a 2-way remote control unit (RC-7000CI and RC-7001RCI,
sold separately), set this to "Used" .
k Display
Adjust display brightness of the receiver.
[Selectable items]
Bright
: Normal display brightness.
Dim
: Reduced display brightness.
Dark
: Very low display brightness.
OFF
: Display is off unless controls are operated.
Operating from the main unit
<DIMMER>
Press .
Bright
4
When setting to "OFF", the display brightness of the menu setting in
operation changes to "Dark".
l Setup Lock
Protect settings from inadvertent change.
[Selectable items]
ON
: Turn protection on.
OFF
: Turn protection off.
• When "Setup Lock" is set to "ON", the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related settings.
⋅ RESTORER
⋅ Night Mode
⋅ MultEQ
⋅ Dynamic EQ
⋅ Dynamic Volume
⋅ Channel Level
⋅ Audio Delay
• To cancel the setting, press
"Setup Lock" screen, then change the setting to "OFF".
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).
Dim
OFF Dark
<MENU> [A.MENU]
or to re-display the
ENGLISH