Quick Select Name; Trigger Out; Remote Id Setup; K 2Way Remote - Denon AVR-2308CI Owner's Manual

g Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9 ! " # % & ' ( ) * + , - . / : ; = (space)
h Trigger Out
Select the conditions to turn on the trigger out with respect to
the zone, input source, surround mode, etc. For details about the
trigger out function, see page 19.
Selecting the Zone
Select the zone for which the trigger out is set.
Setting with Respect to the Input Source
When the input source set to on is selected, the trigger out turns on.
Setting with Respect to the Surround Mode
• When the surround mode set to on is selected, the trigger out turns
on.
• Associated with respect to surround modes that are set to "ON" .
• This can be set if the "MAIN ZONE" is selected at "Selecting the
Zone" .
• Associated when an input source for which "Setting with Respect to
the Input Source" is set to "ON" is selected.
[Selectable items]
ON
: Activate trigger on this mode.
– – –
: Do not activate trigger on this mode.
j Remote ID Setup
Set remote control ID.
[Selectable items] 1 2 3
NOTE
When using the AVR-2308CI with only the included remote control
unit (RC-1080), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
k 2Way Remote
Make setting for 2-way remote control unit.
[Selectable items]
Used
: Use 2-way remote control.
Not Used
: Do not use 2-way remote control.
When using a 2-way remote control unit (RC-7000CI and RC-7001RCI,
sold separately), set this to "Used" .
l Display
Adjust display brightness of the receiver.
[Selectable items]
4
Bright
: Normal display brightness.
Dim
: Reduced display brightness.
Dark
: Very low display brightness.
OFF
: Display is off unless controls are operated.
Operating from the main unit
Press the DIMMER button.
Bright
A0 Setup Lock
Protect settings from inadvertent change.
[Selectable items]
ON
: Turn protection on.
OFF
: Turn protection off.
• When "Setup Lock" is set to "ON" , the settings listed below can
no longer be changed. Also, "SETUP LOCKED!" is displayed if you
attempt to operate related buttons.
⋅ Menu operations
⋅ RESTORER
⋅ Night Mode
⋅ Parameter
⋅ Room EQ
⋅ Channel Level
⋅ Audio Delay
• To cancel the setting, press the MENU button to re-display the "Setup
Lock" screen, then change the setting to "OFF" .
ENGLISH
Dim
OFF Dark