Call Waiting; Call Waiting Tone - Fortinet FON-350i User Manual

To enable the DND operation:
• Press the
• Press the On softkey to enable DND, or press the Off softkey to
disable DND.

Call Waiting

With Call Waiting configured for a FortiVoice extension, notification of a new incoming call is
indicated via several methods. The dedicated extension button flashes to indicate the new call,
and an optional beep tone is delivered over the existing conversation. In addition, the LCD
displays the incoming Caller ID during the notification.
If Call Waiting is disabled, the phone will return a busy status to the phone system and it will
handle the call accordingly. By default, Call Waiting is enabled on all FON-350i phones.
To enable/disable Call Waiting:
• Press the
• Press the On softkey to enable Call Waiting, or press the Off softkey to disable Call Waiting.
• Press the Back softkey or the

Call Waiting Tone

While in a call, the phone can provide a tone over the existing conversation to indicate a call
waiting. To receive the tone, Call Waiting must also be enabled.
To enable/disable Call Waiting Tone:
• Press the
• Press the On softkey to enable Call Waiting Tone, or press the Off softkey to disable Call
Waiting Tone.
• Press the Back softkey or the
Fortinet Technologies Inc.
button, then select 4. Call Preferences, then 1. Do Not Disturb.
button, then select 4. Call Preferences, then 2. Call Waiting.
button to exit the menu.
button, then select 4. Call Preferences, then 3. Call Waiting Tone.
button to exit the menu.
Page 28 FON-350i Telephone User Guide