Sip Configuration, Line Parameters; Sip Server Address; Proxy Port - Fortinet FON-350i User Manual

SIP Configuration, Line Parameters

Assign parameters in this section for each SIP line.

SIP Server Address

The SIP Server Address is the IP address or FQDN of the SIP server or PBX. Different SIP
servers can be defined for each line.
To assign the Call Server address:
• Press the
• Enter the line button number or move the cursor using the Down softkey and press the
Select softkey to select a line.
• Select 1. SIP Server Address.
• Input the SIP Server Address or FQDN using the dial pad and
press the OK softkey to save your entry.
Changing the SIP Server Address requires a reboot of the phone. When you exit the menu, you
will receive a reboot notice.
To enter alphanumeric characters select the Mode softkey.

Proxy Port

The Proxy Port defines the UDP port number employed for SIP signaling transport. In common
practice, the port number 5060 is used.
To change the Proxy Port number:
• Press the
• Enter the line button number or move the cursor using the Down softkey and press the
Select softkey to select a line.
• Select 2. Proxy Port.
• Input the Proxy Port number using the dial pad and press the
OK softkey to save your entry.
Changing the Proxy Port requires a reboot of the phone. When you exit the menu, you will
receive a reboot notice.
Fortinet Technologies Inc.
button, then select 2. SIP Configuration, then 1. Line Configuration.
button, then 2. SIP Configuration, then 1. Line Configuration.
Page 15 FON-350i Telephone User Guide